Brackish Bore Water RO Membrane Industrial | Commercial Reverse Osmosis Filters

BRACKISH WATER REVERSE OSMOSIS WATER PURIFIER

These RO units are leak tested and performance rated locally in QLD Australia

For detailed product specification data sheets on these systems please contact us here and we will email them to you.

The reverse osmosis process produces the purest possible water and results in the total dissolved solids (TDS) count dropping by between 90% and 95% depending on environmental factors and system design. This purification process is commonly considered to be the most effective method of purification available to the public, and will consistently produce water with the lowest level of contaminant. Where water of a higher standard (99-100% contaminant reduction) is required mixed resin post filters may be fitted on request for an extra charge.

These systems will produce between +/- 1,900 to 45,600 litres per day depending on the purity level required, note also that local water pressure and quality of the feed water can cause this estimate to vary. Before buying this system please send us a copy of a recent [less than 12 months old] water analysis report of the water you intend purifying. This is important as it will allow us to verify whether this system will meet your needs or whether any upgrades or different membranes and / or pre-filters will be required.

Reverse Osmosis will reduce all substances / contaminant in feed water. Different types of contaminant have different reduction rates, see the below table for the average effective reduction rates of common contaminants. Note that reduction rates may vary for alternative compounds of the chemicals listed below, different environmental factors and the waste to pure water

ratio.

All of the parts that come into contact with the water in our systems are manufactured from BPA free food grade plastics. All of the filters and parts that we source are of the highest quality and meet the required quality standards.

These systems are supplied as as complete units, all you will need to do is connect the feed water inlet, product water and waste water outlets and power to operate the unit. Where feed water quality is particularly low and / or turbidity levels are high extra pre-filtration may be required, please inquire to see if this may apply to you.

Not all the images displayed in this listing are included in the item for sale as images of other related items are included for informative purposes only but available in our online store.

Please do not buy this system before contacting us to ensure it will deal with the quality of your bore water, meet your requirements and have the correct pre-filtration setup which will be dependant on your water analysis report which we need to see before you but this unit to honour the warranty as warranties cannot be met if the unit is used on water that is outside of the systems parameters and sufficient pre-filtration need to be in place.

This RO unit carries a full 12 month warranty on all parts supplied in the original order, this is subject to our standard terms and conditions listed in our operating manual and us verifying the system can be used with your water before buying the system.