QUALITY LOCALLY ASSEMBLED AND TESTED REVERSE OSMOSIS WATER FILTER
THESE REVERSE OSMOSIS SYSTEMS ARE ASSEMBLED, LEAK / PRESSURE TESTED AND PERFORMANCE RATED LOCALLY IN OUR QUEENSLAND PREMISES
Our locally assembled reverse osmosis units are designed to provide the purest possible drinking water with minimal effort. All of our locally assembled units are leak tested overnight under pressure and checked to ensure that they are operating optimally and producing water of a standard that meets our quality guidelines.
Reverse osmosis technology is known for its ability to produce pure water of a consistent quality, typically reducing the total contaminant in the feed water by +/- 95% on average. Our systems are effective in removing various contaminants from your drinking water, including fluoride, chlorine, cysts, bacteria and heavy metals among many other contaminants as indicated in the table below.
| CONTAMINANT |
REDUCTION |
CONTAMINANT |
REDUCTION |
|
Barium |
97% |
Potassium |
99.9% |
|
Bicarbonate |
99.9% |
Radium |
97% |
|
Cadmium |
97% |
Selenium |
97% |
|
Calcium (Hardness) |
99.9% |
Silicate |
99% |
|
Chromate |
95% |
Silver |
99% |
|
Copper |
97% |
Sodium |
98% |
|
Detergents |
97% |
Strontium |
97% |
|
Fluoride |
99%-99.9% |
Sulphate |
99.9% |
|
Lead |
97% |
PCB’s |
97% |
|
Magnesium |
99.9% |
Insecticides |
97% |
|
Nickel |
97% |
Herbicides |
97% |
All of the parts that come into contact with the water in our systems are manufactured from BPA free food grade plastics. All of the filters and parts that we use when assembling your system have NSF INTERNATIONAL (National Sanitation Foundation), WQA (Water Quality Association) or FDA (Food and Drug Administration) quality standard certification.
SYSTEM SPECIFICATIONS:
|
Minimum feed pressure |
45psi / 300kpa |
|
Recommended feed pressure |
60-80psi / 400-550kpa |
|
Minimum operating temperature |
5°C / 40°F |
|
Maximum operating temperature |
45°C / 110°F |
|
Minimum feed water pH |
pH 3 |
|
Maximum feed water pH |
pH 11 |
|
Maximum feed water TDS |
1000ppm* |
|
Production rate |
50GPD / 200LPD |
*Where the feed water TDS reading is high, the minimum operating pressure of the unit may be affected. If your feed water TDS is in excess of 400ppm we recommend that you consult us before you purchase. Generally, these systems are suited to most town mains water supplies, however if you are intending to use the unit on tank or bore water we recommend testing the feed pressure and water quality first.
This RO unit has a 10 year warranty which is subject to our warranty terms and conditions and is installed with a pressure reducing valve and leak shut off device
According to regulatory standards any water filter system under constant water pressure (regardless of the brand or supplier) is required to be fitted with an AS3497 approved pressure reducing valve and back-flow prevention device