Replacement Pads For Leak Stop Device
Select the pack size required from drop down menu and measurements are approximate to about 1mm. The 16mm x 8mm pads are to fit the 1st leak detection device of the two extra images and the 20mm x 10mm ones are to suit the type in the 2nd image with the red plunger and blue circlips.
This item is posted in an envelope without racking by standard post and if you need tracking then select the express post option which is sent with tracking.
Extra pads purchased should be stored in an airtight zip lock bag to keep them away from moisture and humidity
Stops major damage to your cupboards, floor or home by cutting off water supply to filter
Uses replaceable sensor pads to detect leaks and it`s recommended to replace the sensor pads every 12-months or after a leak
Works on hydrophilic and mechanical principles and does not require power
No batteries or electronic sensors required
Proven track record with operating pressure range of 50-700kpa [7-100psi]
Build in quick connect fittings to easily install in line with your 6mm [1/4"] tubing
We recommend that a leak detector shut off device is installed with any water filter and / or reverse osmosis system which is under pressure - listed separately.
According to regulatory standards any water filter system under constant water pressure [regardless of the brand or supplier] is required to be fitted with an AS3497 approved pressure reducing valve and back-flow prevention device which we also have listed separately.
If you are not entirely satisfied with your purchase please contact us so that we can try to resolve your concerns before leaving any neutral or negative feedback