REVERSE OSMOSIS WATER PURIFIER WITH 316 MARINE GRADE STAINLESS STEEL FRAME
THIS RO UNIT IS ASSEMBLED, LEAK TESTED AND PERFORMANCE RATED LOCALLY IN AUSTRALIA
Reverse osmosis produces the purest water and results in the total dissolved solids (TDS) count dropping by between 85% and 95% depending on environmental factors and system design. This purification process is commonly considered to be the most effective method of purification available to the public, and will consistently produce water with the lowest level of contaminant.
Where water of a higher standard (99-100% contaminant reduction) is required mixed resin post filters may be fitted on request for an extra charge.
Will produce between +/- 2,000 and +/- 4,000 litres per day depending on the system selected, the purity level required, note also that local water pressure and quality of the feed water can cause this estimate to vary.
If you plan to use this unit on ground bore water we strongly recommend performing basic water tests (TDS, salinity, hardness / calcium and iron) to determine whether the water is within the systems operating parameters. If you are unsure as to whether this unit suits your needs, feel free to send us a message with any details you have on your water, a TDS reading is the most important for us.
Reverse osmosis will reduce all of contaminant found in the feed water. Different types of contaminant have different reduction rates, see the below table for the effective reduction rates of common contaminants. Note that reduction rates may vary for alternative compounds of the chemicals listed below and different environmental factors.
All water contact parts in our systems are manufactured from high quality food grade BPA free plastics and all our filters and systems have the relevant NSF INTERNATIONAL (National Sanitation Foundation), WQA (Water Quality Association) or FDA (Food and Drug Administration) quality standard approvals.
* Heavy duty frame constructed from 316 grade stainless steel
* Three 20"x2.5" big blue pre-filter housings
* One 20x2.5 poly spun sediment filters (we may advise that you change this combination depending on your source water)
* Two 20x2.5 carbon block filter cartridges (we may advise that you change this combination depending on your source water)
* Reliable diaphragm booster pump/s (including Australian approved transformer/s)
* 4021 brackish water NSF certified reverse osmosis membrane element/s
* Appropriate ring spanner to loosen and tighten the pre-filter housings
The system is supplied as a complete unit, all you will need to do is connect the feed water inlet, product water and waste water outlets and power to operate the unit. Where feed water is particularly bad extra pre-filtration may be required, please inquire to see if this may apply to you.
Depending on the water you intend filtering and your anticipated volumes in some instances you may require higher volume pre-filters to this system so if you are unsure please contact us with any queries you may have.
This RO unit carries a 24 month warranty on all parts supplied in the original order, this is subject to our standard terms and conditions listed in our operating manual