HRO-3-D Reverse Osmosis RO Water Filters Marine Fish RODI Resin Filter

3-STAGE COMPACT PORTABLE RO PURIFIER + ALL FILTERS

This system is locally assembled using high quality approved parts

This is a 3-stage filter unit with a combined sediment + carbon pre-filter + 1x 50gpd reverse osmosis membrane + 1x final stage DI resin filter

Easy to carry around and great for producing pure H2O for topping | filling up fish tanks

Produces +/- 190 litres per 24-hours depending on local mains water pressure and quality 

The reverse osmosis process results in the purest possible water and results in the total dissolved solids (TDS) count dropping by +/- 95% depending on environmental factors. The mixed deionising resin the the last filter removes the final traces not removed by the RO filter resulting in water that is 99.9% to 100% pure.

This purification process is commonly considered to be the most effective method of purification available to the public, and will consistently produce the lowest level of contaminant.

RO DI  will reduce / remove all of contaminant in the feed water including Chlorine, Fluoride, Volatile organic compounds, Disinfection by-products and heavy metals.

See below table for effective reduction of common contaminants:

All of the parts that come into contact with the water in our systems are manufactured from BPA free food grade plastics. All of the filters and parts that we source are of the highest quality and meet the required quality standards.

SYSTEM INCLUDES:

• 1x in line sediment + carbon pre-filter
• 1x 50GPD reverse osmosis membrane
• 1x in line mixed resin deionising post membrane DI filter
• 3x meters of high pressure 1/4" | 6mm water filter tube
• 1x standard* sink mixer diverter valve with thread converter or a connector to fit 3/4" and 1/2" garden taps depending on your selection

* Standard mixer taps refer to a mixer tap where you can unscrew the aerator on the end of the tap and will be left with either a 20mm female thread or a 23mm male thread. If you have the 20mm female thread you'll need to use the inside to outside thread converter [in the 2nd picture and supplied with this item] to connect but if you have a 23mm male thread after removing the aerator you won't need to use the thread converter

This RO system is a multi-stage pumpless system. It is designed to operate on mains pressure and will produce with feed water pressure of 45psi or greater

This RO unit carries a full 24 month warranty on all parts supplied in the original order, this is subject to our standard terms and conditions listed in our operating manual

If you are not entirely satisfied with your purchase please contact us so that we can try to resolve your concerns