10"x2.5" Tinted Clear Water Filter Housing | NO FILTERS | 1/4"BSP [12mm] Ports

10"x2.5" Tinted Clear Water Filter Housing

Clear housings are not rated / approved for mains water pressure and if you need a mains pressure rated filter housing we have one listed here

As this housing is not approved for mains water use it should be used in applications where it is not subjected to constant water pressure i.e. used after and approved tap / valve which is turned on when the filter is used and turned off when not in use.

This housing is a twin O-ring housing with 1/4"NPT [12mm] in + out coupling ports

PLEASE NOTE: This is a housing only and does not include any filters, a bracket or spanner which we have listed in our store separately if you require them. Items in pictures 2-8 are not included with this listing and are of other related items available in our online store.

Accommodates all standard 10"x2.5" water filter cartridges which measure +/- 25cm x +/- 7cm

All of the parts that come into contact with the water in our systems are manufactured from BPA free food grade plastics. All of the filters and parts that we source are of the highest quality and meet the required quality standards.

This water filter housing carries a full 24 month warranty on all parts supplied in the original order, this subject to our standard terms and conditions listed in our operating manual.

If you are not entirely satisfied with your purchase please contact us so that we can try to resolve your concerns 

According to regulatory standards any water filter system under constant water pressure [regardless of the brand or supplier] is required to be fitted with an AS3497 approved pressure reducing valve and back-flow prevention device which we have listed separately in our store. We also recommend that a leak detector shut off device is installed with any water filter and / or reverse osmosis system which is under pressure and is also for sale in our store.