PRO5-DJ Higher Volume* Lower Waste* Portable & Wall
Mountable Reverse Osmosis RO DI Purifier + All Filters
Depending on variation selected in drop down menu above we will supply as follows:
Membrane
|
Flow Rate
|
Water Connector
|
Recommended Use
|
1st-50GPD 2nd-50GPD
|
12LPH
|
Sink Mixer & 1/2” + 3/4” Garden Taps
|
Marine Aquariums + Some Freshwater Fish Tanks
|
1st-75GPD 2nd-50GPD
|
18LPH
|
Sink Mixer & 1/2” + 3/4” Garden Taps
|
Marine Aquariums + Some Freshwater Fish Tanks
|
1st-100GPD 2nd-50GPD
|
20LPH
|
Sink Mixer & 1/2” + 3/4” Garden Taps
|
Marine Aquariums + Some Freshwater Fish Tanks
|
1st-150GPD 2nd-100GPD
|
25LPH
|
Sink Mixer & 1/2” + 3/4” Garden Taps
|
Marine Aquariums + Some Freshwater Fish Tanks
|
1st-180GPD 2nd-100GPD
|
40LPH
|
Sink Mixer & 1/2” + 3/4” Garden Taps
|
Marine Aquariums + Some Freshwater Fish Tanks
|
1st-180GPD 2nd-150GPD
|
45LPH
|
Sink Mixer & 1/2” + 3/4” Garden Taps
|
Marine Aquariums + Some Freshwater Fish Tanks
|
This system is locally assembled using high quality approved parts
*Unit is setup with the waste of the 1st membrane feeding the inlet of the 2nd membrane [in series] to reduce the waste ratio of the unit which will result in slightly higher DI resin use. If you want the membrane setup in parallel for maximum flow and and not reduced waste we can do so but you'll just need to send us a message when checking out asking for this change.
Standard pre-filters will filter +/- 10,000 litres of water before needing to be changed [based on total flow of pure + waste water] whereas the high flow combination of pre-filters will allow +/- 35,000 litres to be filtered before the pre-filters need to be changed.
SYSTEM INCLUDES:
- Powder coated, mild steel folded bracket
- 3x 10"x2.5" white or clear tinted filter housings [vertical ones]
- 1x 10"x2.5" 0.5uM poly spun sediment filter
- 1x 10"x2.5" selected carbon block pre-filter
- 1x 10"x2.5" jumbo post RO mixed DI resin filter [2.5x as much resin as in line post filters]
- 2x high quality reverse osmosis membranes [flow rate depends on selection in drop down menu]
- 3x meters of high pressure 1/4" | 6mm water filter tubing
- 1x opening + closing housing ring spanner
- 1x standard* sink mixer diverter connector
- 2x garden tap connectors for 1/2" + 3/4" taps
* Standard mixer taps refer to a mixer tap where you can unscrew the aerator on the end of the tap and will be left with either a 20mm female thread or a 23mm male thread. If you have the 20mm female thread you'll need to use the inside to outside thread converter [supplied with the diverter valve] to connect but if you have a 23mm male thread after removing the aerator you won't need to use the thread converter
Easy to carry around and great for topping up freshwater aquariums, caravaning, camping and home use + produces 190-685 litres per day depending on mains water pressure, feed water quality and system selected
The reverse osmosis process results in the purest possible water and results in the total dissolved solids (TDS) count dropping by between +/- 99.9% and 100% with a post membrane DI
This purification process is commonly considered to be the most effective method of purification available to the public, and will consistently produce the lowest level of contaminant.
RO will reduce/remove all of contaminant in the feed water including chlorine, fluoride, volatile organic compounds, disinfection by-products and heavy metals
See below table for effective reduction of common contaminants:
ELEMENT / COMPOUND
|
% REDUCED
|
ELEMENT / COMPOUND
|
% REDUCED
|
Barium
|
99.99%
|
Potassium
|
100%
|
Bicarbonate
|
100%
|
Radium
|
99.99%
|
Cadmium
|
99.99%
|
Selenium
|
99.99%
|
Calcium (Hardness)
|
100%
|
Silicate
|
100%
|
Chromate
|
99.99%
|
Silver
|
100%
|
Copper
|
99.99%
|
Sodium
|
100%
|
Detergents
|
99.99%
|
Strontium
|
99.99%
|
Fluoride
|
100%
|
Sulphate
|
100%
|
Lead
|
100%
|
PCB’s
|
99.99%
|
Magnesium
|
100%
|
Insecticides
|
99.99%
|
Nickel
|
99.99%
|
Herbicides
|
99.99%
|
All of the parts that come into contact with the water in our systems are manufactured from BPA free food grade plastics. All of the filters and parts that we source are of the highest quality and meet the required quality standards.
Membrane brand/s of the membrane supplied with the system may vary depending from those depicted what we have in stock but will be of equivalent quality
This RO system is a multi-stage pumpless system. It is designed to operate on mains pressure and will produce with feed water pressure of 45psi or greater.
This RO unit has a 36 month warranty which is subject to our warranty terms and conditions and is installed with a pressure reducing valve and leak shut off device
If you are not entirely satisfied with your purchase please contact us so that we can try to resolve your concerns